How to configure bynav M2/C2/C1/T1 with AgOpenGPS in autosteering system

2023 | 12 | 12

by Bynav

This article is reposted from RTK4U (AUTOSTEER)

To configure the ByNav receiver, it is best to use the ByNav software BY-CONNECT. (https://www.bynav.com/en/resource/support?cat=7)

Explanation of Commands for AgOpenGps C2-M20 (Uses COM3)

Special Commands when using T1-FD as separate receiver

C1-FD am PCB von www.autosteer.cc
when using bynav C1/C2/M2 module on www.autosteer.cc pcb use com1 for output:

You can get related C2/M20 product by direct purchase in the online shop

Shipment from Austria

Back list

News

Adhering to the customer-centered, strive-oriented corporate culture, we have a R&D team with comprehensive technology, strong innovation capability and reasonable structure.

2020 | 11 | 17
X1 GNSS/INS Receiver | User Case

X1 GNSS/INS Receiver User Case
2024 | 03 | 07
Bynav makes an appearance at GCA 2024

At GCA 2024 , Bynav exhibited a series of products at the exhibition, including High-precision Positioning GNSS SoC, Multi-source Fusion Positioning Modules, Positioning Box, as well as GMouse RTK Antenna.
2024 | 09 | 06
Byanv Seleted as the National "Little Giant" Enterprise

Byanv Technology has been included in the sixth batch of the "Little Giant" Enterprise list, as published by the Ministry of Industry and Information Technology of the People's Republic of China.

How to configure bynav M2/C2/C1/T1 with AgOpenGPS in autosteering system

Explanation of Commands for AgOpenGps C2-M20 (Uses COM3)

News

News

X1 GNSS/INS Receiver | User Case

Bynav makes an appearance at GCA 2024

Byanv Seleted as the National "Little Giant" Enterprise